48 found, showing page 2 of 4
1/2" 45 ELBOW CPVC
Used To Change Direction In Piping. Sometimes Used In Conjunction With A 12"L CPVC Tubing On Long Runs To Absorb Expansion.
- 45 Degree Elbow
- Hot & Cold Water Tubing & Piping
- Size In : 1/2
- Used To Change Direction In Piping. Sometimes Used In Conjunction With A 12 In Length Of CPVC Tubing On Long Runs To Absorb Expansion
View Details
Call for Price
3/4" 45 DEGREE ELBOW CPVC
Used To Change Direction In Piping. Sometimes Used In Conjunction With A 12"L CPVC Tubing On Long Runs To Absorb Expansion. Bagged.
- 45 Degree Elbow
- Hot & Cold Water Tubing & Piping
- Size In : 3/4
View Details
Call for Price
1/2" 90 ELBOW CPVC
SLIP X SLIP Used To Change Direction In Piping.
- 90 Degree Elbow
- Hot & Cold Water Piping
- Size In : 1/2
- Used To Change Direction In Piping
View Details
Call for Price
3/4" 90 ELBOW CPVC
SLIP X SLIP Used To Change Direction In Piping.
- 90 Degree Elbow
- Hot & Cold Water Piping
- Size In : 3/4
- Used To Change Direction In Piping
View Details
Call for Price
3/4" x 1/2" 90 REDUCING ELBOW
Used To Change Direction In Piping. Bagged.
- Reducing 90 Degree Elbow
- Hot & Cold Water Piping
- Size In : 3/4 X 1/2
- Used To Change Direction In Piping. This Elbow Can Also Be Used As A 3/4 In Street Elbow
View Details
Call for Price
1/2" TEE CPVC
Used To Provide A Branch Supply Line From A Main Line.
- Tee
- Hot & Cold Water
- Size In : 1/2
- Used To Provide A Branch Supply Line From A Main Line
View Details
Call for Price
3/4" TEE CPVC
Used To Provide A Branch Supply Line From A Main Line.
- Tee
- Hot & Cold Water
- Size In : 3/4
View Details
Call for Price
3/4" PVC/CPVC ADAPTER COUPLING
Used In Cold Water Applications Only To Adapt From CPVC Pipe To PVC Pipe.
- Adapter - PVC to CPVC
- Slip (IPS)X SlipCTS : 3/4 X 3/4
- CPVC Construction Is Impervious To Mineral Build-Up And Corrosion
- CPVC Systems Are Accepted By Major Model Building Codes
- For Adapting From CPVC Pipe To PVC Pipe In Cold Water Applications Only
- Solvent-Weld Installation To CPVC Tubing Requires No Soldering
View Details
Call for Price
3/4" TUBING STRAPS 25PK
Incorporates A Special Design Which Allows For Pipe Expansion, Straps Can Be Used On Copper, CPVC And Polybutylene Tubing. Nails Are Not Included.
- Size In : 3/4
- Incorporates A Special Design Which Allows For Pipe Expansion
- Can Be Used On Copper, CPVC And Pex Tubing
- Genova Recommends Using No 6 X 1 In Screws Which Do Not Require Pre-Drilling
View Details
Call for Price
1/2" 45 STREET ELBOW CPVC
Used On Close Offsets Where Very Short Pieces Of CPVC Pipe Would Otherwise Have To Be Used With Conventional 45 Degree Elbows. A Principal Use Is To Offset Piping Over And Around Existing Piping Mounted On Flat Surfaces Such As A Wall Or Ceiling.
- 45 Degree Street Elbow
- Hot & Cold Water Piping
- Size In : 1/2
View Details
Call for Price
3/4" 45 STREET ELBOW CPVC
Used On Close Offsets Where Very Short Pieces Of CPVC Pipe Would Otherwise Have To Be Used With Conventional 45 Degree Elbows. A Principal Use Is To Offset Piping Over And Around Existing Piping Mounted On Flat Surfaces Such As A Wall Or Ceiling.
- 45 Degree Street Elbow
- Hot & Cold Water Piping
- Size In : 3/4
View Details
Call for Price
1/2" 90 STREET ELBOW CPVC
Used To Change Direction In Piping From A Fitting Socket. Also Used In Conjunction With A Conventional CPVC 90 Degree Elbow To Fabricate A Change Of Direction Of Piping At Any Angle. No.52907 Is 3/4" X 1/2" Reducing Elbow As Well As 3/4" Street Elbow. Bagged.
- 90 Degree Street Elbow
- Hot & Cold Water Piping
- Size In : 1/2
View Details
Call for Price
MALE ADAPTER 1/2 CPVC X CO BRASS
Unique Molded CPVC/Stainless Steel Design With Internal "Knurl" And EPDM O'ring Insures Reliability And Integrity. Large Stainless Steel Hex For Easy Connection To IPS Sized Pipe And Fittings. Meets/Exceeds ASTM And ANSI Standards. Pressure Rated To 100 Psi At 180 Degrees F. Made With EverTUFF CPVC And Type 304 Stainless Steel.
- Stainless Steel Adapter
- Lead Free
- Size MPTxCTS Hub : 1/2
- Unique Molded CPVC/Stainless Steel Design With Internal "Knurl" And EPDM O-Ring Insures Reliability And Integrity
- Made With Noveon FlowGuard Gold
View Details
Call for Price
MALE ADAPTER 3/4 CPVC X C
Unique Molded CPVC/Stainless Steel Design With Internal "Knurl" And EPDM O'ring Insures Reliability And Integrity. Large Stainless Steel Hex For Easy Connection To IPS Sized Pipe And Fittings. Meets/Exceeds ASTM And ANSI Standards. Pressure Rated To 100 Psi At 180 Degrees F. Made With EverTUFF CPVC And Type 304 Stainless Steel.
- Stainless Steel Adapter
- Lead Free
- Size MPTxCTS Hub : 3/4
View Details
Call for Price
CPVC TEE 3/4" x 1/2" x 1/2"
Used To Provide A Branch Supply Line From A Main Line. Reduces To Smaller Pipe Size.
- Reducing Tee
- Hot & Cold Water
- Size In : 3/4 X 1/2 X 1/2
View Details
Call for Price